News & Events
Stay up to date with all of the latest industry and legislative news relating to the safety and maintenance of workplace equipment.
We will post blogs relating to HSE prosecutions and HSE accident statistics, safety initiatives and topical events relating to equipment safety and the consequences of failing to maintain equipment at work across a wide range of industries – from farming to construction, warehousing to transport and logistics. In addition we will highlight how our Good to Go Safety inspection systems could help to improve workplace safety and help your company to reduce maintenance costs while complying with key statutory legislations such as PUWER, LOLER and WAHR.
DVSA Van Statistics
- Author Good to Go Safety
- 0
- 1182 Views
The UK uses more that three and a half million vans for business activities. As part of targeted roadside checks, the DVSA (Driver and Vehicle Standards Agency) stop around 15,000 vans each year to carry out spot checks on vehicles and issue prohibitions if necessary. A prohibition prevents van drivers from using the vehicle until the problem is fixed and can cost owners and operators up to £4,000 per day, per vehicle.
59.9% of vehicle prohibitions were due to a mechanical defect / failure an...
Government release trailer statistics
- Author Good to Go Safety
- 0
- 1203 Views
Nearly 4000 trailers (including 730 caravans) were checked by the Driver and Vehicle Standards Agency (DVSA) between 2019 and 2021.
The inspections carried out by the DVSA highlighted significant issues with many of the trailers and caravans. Of the 3,083 trailers (not a caravan) that were inspected, 50% were non-compliant, and 41% were issued with an immediate prohibition (defects so dangerous that repairs are required prior to re-use).
The data available shows that construction trailers...
What can you inspect with TakeAIM?
- Author Good to Go Safety
- 0
- 4652 Views
TakeAIM is supplied with a number of pre-installed checklists for the most popular equipment types used for work. If TakeAIMs range of pre-loaded inspections don't have the equipment type you require, you can create your own equipment type on the TakeAIM dashboard. This enables you to create inspections, and ask the detailed question required for even the most unique piece of workplace equipment.
If you'd like to see the equipment types available, plus what is included on each checklist you c...
Fleet management – a guide to who, what, why and how
- Author Good to Go Safety
- 0
- 895 Views
Anyone involved with driving for work or for the management of fleet vehicles should find our latest guide of interest as it highlights ways for businesses to improve vehicle inspections and management.
This TakeAIM guide provides useful advice on getting the most out of your fleet and covers many of the key questions and considerations that management may come across. We look at key legislation, industry statistics, grey fleet issues, and driver concerns as we aim to deliver the answers and ...
Fire Safety Regulations - Be a Responsible Person with TakeAIM
- Author Good to Go Safety
- 0
- 719 Views
The Government continues to implement new legislation following the Hackett review and Grenfell Tower Inquiry. This has resulted in amendments to the existing Regulatory Reform (Fire Safety) Order 2005 (Fire Safety Order) which governs day to day fire safety.
There are also very challenging new fire safety regulations – the Fire Safety (England) Regulations 2022 – which came into force on 23 January 2023. With these regulations now in place, we thought we'd remind everyone that TakeAIM can he...
LPG Forklift Truck Safety Alert
- Author Good to Go Safety
- 0
- 2129 Views
The UK Material Handling Association have recently released their latest Safety Alert which looks at cold starting an LPG truck engine.
This Safety Alert has been issued following some reports of users of LPG powered trucks experiencing issues with the start-up process. David Goss, UKMHA Technical Director, explains, “Investigations into the root cause are ongoing, but instances where a build-up of deposits in the evaporator (pressure regulator), flow regulator and shut-off valve have been id...
Sometimes it's "Good to Go" around in Circles
- Author Good to Go Safety
- 0
- 978 Views
It’s not always obvious where to start with managing driver risk. After all, there are so many different areas that need to be tackled. And how do we know whether what we’re doing is good or bad, or whether we have any glaring gaps. It’s easy to feel like we’re just going round in circles.
There is a simple process that can help you, based around four easy-to-understand steps:
1. Benchmarking – Do I need to improve?
2. Gap Analysis – If I need to improve, where do I start?
3. Action – How ...
Tyre Blow Outs & Illegal Tyres on UK Roads
- Author Good to Go Safety
- 0
- 1717 Views
I don't know about you, but whenever i see the husk of a blown out tyre at the side of a dual carriageway / motorway, it gives me the chills. The rubber fragments and skid marks weaving across the lanes is a firm reminder that tyre blowouts are common and extremely dangerous.
Whilst analysing almost 400,000 cars over a 21 month period, Evans Halshaw found that on average 26% of UK motorists had at least one illegal tyre. Read Evans Halshaws full findings - click here
Workers such...
The Benefits of Pre-Drive Checklists
- Author Good to Go Safety
- 0
- 1714 Views
Driving may be one of the most hazardous working activities in the UK
The government’s Work-Related Road Safety Task Group estimates that up to a third of all road traffic accidents involve someone who is at work at the time. This may account for over twenty fatalities and 250 serious injuries every week.
Managing the risks to employees who drive at work requires more than just compliance with road traffic legislation. The Health and Safety at Work etc Act 1974 requires employers t...
Brick and Mortar are not inherently safe
- Author Good to Go Safety
- 0
- 630 Views
A story recently posted by the EuroNews told readers how one person prevented a catastrophic loss of life by reporting an unsafe building. The sharp-eyed man alerted emergency services after seeing cracks appear in a four-storey building. The building which was made up of both commercial and residential properties was cordoned off by the fire department and evacuated. The building then collapsed, the firefighters rescued one person from the rubble, with only light injuries and one death was late...
Why fleet and driver safety shouldn’t be a lottery
- Author Good to Go Safety
- 0
- 1485 Views
The HSE (Health and Safety Executive) have investigated an accident where a HGV driver suffered fatal chest injuries. The driver was unstrapping a load on the flatbed trailer, when the load (steel gates) fell and tragically crushed him. Andrew Bayley-Machin, 41, was fatally crushed after the steel gates fell approximately 10 ft from the trailer.
Do you play the National Lottery? Millions do and, every week, they buy a ticket in the hope of winning the jackpot. Yet the odds of doing that a...
HGV driver suffers fatal injuries
- Author Good to Go Safety
- 0
- 922 Views
The HSE (Health and Safety Executive) have investigated an accident where a HGV driver suffered fatal chest injuries. The driver was unstrapping a load on the flatbed trailer, when the load (steel gates) fell and tragically crushed him. Andrew Bayley-Machin, 41, was fatally crushed after the steel gates fell approximately 10 ft from the trailer.
The investigation by the HSE found that planning arrangements for restraining the load were inadequate. Heavy goods should be stable independent ...
The Most Common Forklift Accidents and How to Prevent Them
- Author Good to Go Safety
- 0
- 918 Views
Every year in the UK there are hundreds of serious injuries, including fatalities, to forklift truck operators and pedestrians, which could have been prevented if staff were properly trained and followed safe systems of work. Within the material handling industry alone, there are over 1,300 forklift truck accidents a year, which means on average there are five accidents every workday in the UK.
When we look at statistics from the United States, these numbers are even more staggering with ...
Factory and Warehousing Safety Tips
- Author Good to Go Safety
- 0
- 2090 Views
Factories and warehouses have numerous health and safety risks. If you fail to manage them, your business may face a number of different issues such as lost working days, injuries and in the worst case scenario, fatalities.
As an employer, you are legally required to implement and maintain procedures that minimise these risks. Safety measures must protect workers from factory and warehousing hazards and enable workers to carry out their jobs safely.
Maintaining good safety will not...
1,759 road casualties linked to vehicle defects last year
- Author Good to Go Safety
- 0
- 951 Views
Defective and poorly-maintained vehicles were linked to 1,759 road casualties recorded in 2021. Issues such as defective lights, worn tyres and ineffective brakes caused a 7% rise on the previous year.
The number of road casualties caused by defective / faulty vehicles in 2021 continued to be impacted by the UK restrictions following the coronavirus pandemic, including a period of lockdown in the first quarter of the year. There was a rise in casualty numbers compared to 2020, which was ...
Employee sustains extensive injuries after being dragged into machine
- Author Good to Go Safety
- 0
- 867 Views
An investigation by the Health and Safety Executive (HSE) found that a manufacturer of paper and cardboard (Amberset Limited) failed to regularly review safety measures on their machinery and equipment to ensure that access to hazardous parts was prevented. The HSE found that the safety of the paper rewinder had not been reviewed since August 1998.
If Amberset Limited had conducted safety inspections on their machinery and equipment they would have spotted that the paper rewinder was not ...
HSE inspections focussed on manufacturing sector
- Author Good to Go Safety
- 0
- 741 Views
The Health and Safety Executive (HSE) have started targeting the manufacturing sector in an effort to ensure employers have suitable arrangements in place to manage health and safety and ensure they comply with the COSHH (Control of Substances Hazardous to Health Regulations 2002).
Inspections will be carried out to ensure Local Exhaust Ventilation, Water Suppressors and PPE (Personal Protective Equipment) is in good working order. If any health and safety breaches are discovered, the HSE...
Roofer dies after fall from ladder
- Author Good to Go Safety
- 0
- 1046 Views
A roofing contractor has been fined after an employee fell from a ladder and died at the scene.
Whilst carrying roof tiles an employee slipped from a triple extending access ladder and fell to the ground, sustaining fatal injuries.
An investigation by the Health and Safety Executive (HSE) found that the interlocking sections of the ladder they had been negotiating did not allow for three points of contact to be maintained, especially when a load was being carried: a single pole access ladd...
It's National Scaffolding Week
- Author Good to Go Safety
- 0
- 744 Views
In support of #ScaffWeek (26-30th Sept) Good to Go Safety are providing a discount on all online orders for Scaffolding products between 26-30th September 2022.
Good to Go Safety and TakeAIM provide products to ensure users / hirers can inspect and maintain their Scaffolding (along with limitless other equipment types).
Shockingly there were 90 RIDDOR accidents reported by NASC members during 2021. You only have to keep one eye on HSE reports to notice the regularity of accidents reg...
Maintaining Work Equipment
- Author Good to Go Safety
- 0
- 690 Views
Since January the 1st 2021 the rules and procedures regarding work place maintenance of machinery and equipment has changed. In order to ensure that work place machinery and equipment doesn't deteriorate to the extent that it may put people in harms way, employers are required by PUWER (The Provision and Use of Work Equipment Regulations 1998) to maintain it to a good standard.
Effective maintenance of work place machinery and equipment can not only help businesses meet the expectations o...